WOODEN BODY MEASUREMENT CHECKS

Document Number: SS92

Author: Thomas Sloan Kirton

Date Created:

Revision Number: v1.0.0

Document Approved by:

NOTE. Document is uncontrolled if printed 

All instructions in this manual must be adhered to for this stage. Read all instructions carefully and study the photographs. While learning this procedure, quality of work is more important than speed of assembly.

1.Outer wooden frame (top of B-pillar cut out) measurement: 1390mm.

Use image for reference.

2.Inner wooden frame (top of B-pillar block) measurement: 1338mm.

Use image for reference.

3.Outer B-pillar join point to outer scuttle point measurement: 678mm.

Repeat process to both sides.

Use image for reference.

4.Rear wood rail top to chassis rear shelf top measurement: 113mm.

Use image for reference.

5.Rear arch rear section measurement: 342mm.

Repeat process to each arch.

Use image for reference.

6.Use rear arch templates to check form and fit.

Check both sides.

Use image for reference.

7.Use the underside rocker templates to check form and fit.

Check both sides.

Use image for reference.

8.Use the rocker profile templates to check form.

Check both sides.

Use image for reference.