SUPERSPORT WOODEN BODY HINGE PILLAR FITMENT

Document Number: SS116

Author: Thomas Sloan Kirton

Date Created: 21/11/2025

Revision Number: v1.0.0

Document Approved by:

Once the rocker has been attached to the tub, attach the hinge pillar to the corner bracket & hinge plate with x4 1mm door hinge shims. See areas labelled 1 for areas of fixing.

CARE POINT: Ensure the bracket & hinge plate edges sit flush and the measurements between the top and bottom corners of the hinge pillar are within tolerance. 

Fix the corner bracket to the hinge pillar in areas labelled 2.

Use image for reference.

Fix the dash rail to the tub. 

CARE POINT: Ensure the corner bracket locates on the cut outs provided in the dash rail before fixing.

CARE POINT: Ensure the datum hole labelled 1 is fixed down first and follow with the other fixings circled. 

CARE POINT: Ensure the bracket & hinge plate edges sit flush and the measurements between the top and bottom corners of the hinge pillar are within tolerance. 

Use image for reference.

Fit the rocker & other parts to stabilise the hinge pillar in place.

Build up the rear of the car before the next stage of instruction. 

Use image for reference.

CARE POINT: Carry out the measurements between the hinge pillar top/bottom and the B-Pillar join and ensure they are within tolerance.

Use image for reference.

Fit the scuttle rail.

CARE POINT: Carry out the measurements from the scuttle corners back to the B-Pillar join and ensure that they are in tolerance.

Once the wooden body has been finished, fix the corner bracket to the dash rail. M8 nuts and bolts may be used to ensure the bracket lines up with the holes before fixing.

Use image for reference.