HOOD COVER SUB ASSEMBLY
Document Number: SS96
Author: Thomas Sloan Kirton
Date Created:
Revision Number: v1.0.0
Document Approved by:
NOTE. Document is uncontrolled if printed
All instructions in this manual must be adhered to for this stage. Read all instructions carefully. While learning this procedure, quality of work is more important than speed of assembly.

Ensure the hood cover is in the correct orientation before fitment of the button.
Fit x2 quick release latch buttons to the hood cover with the nuts provided and tighten.
See the diagram for both top and bottom views of the bush button fixing.
Use image for reference.