FRONT ARCH LINER FIT
Document Number: SS4
Author: Thomas Sloan Kirton
Date Created:
Revision Number: v1.0.0
Document Approved by:
NOTE. Document is uncontrolled if printed
All instructions in this manual must be adhered to for this stage. Read all instructions carefully and study the photographs. While learning this procedure, quality of work is more important than speed of assembly.

- ARCH LINER FRONT AND REAR TO BE ASSEMBLED BEFORE FITMENT
- USE 4 X F401014 SCRIVETS

- USE x4 M6 X 20 BOLTS (U010014), x1 M6 SERRATED FLANGE NUT (MGN0024) & x5 M6 PENNY WASHERS (MGW0106) TO FIX INTO POSITION.
- CARE POINT: USE BLUE LOCTITE ON SERATED FLANGE NUT.

- USE x7 M6 X 20 BOLTS (U010014), x1 M6 SERRATED FLANGE NUT (MGN0024) & x7 M6 PENNY WASHERS (MGW0106) TO FIX INTO POSITION.
- SEE THAT THE TOP RIGHT BOLT ON MID SECTION DOES NOT REQUIRE A PENNY WASHER.
- CARE POINT: USE BLUE LOCTITE ON SERATED FLANGE NUT.