LUGGAGE PANEL FITMENT
Document Number: SS106
Author: Thomas Sloan Kirton
Date Created:
Revision Number: v1.0.0
Document Approved by:
NOTE. Document is uncontrolled if printed
All instructions in this manual must be adhered to for this stage. Read all instructions carefully and study the photographs. While learning this procedure, quality of work is more important than speed of assembly.
Before the body mount stage apply 2 constant lines of Teroson 934 in the areas shown pink.
Use Image for reference.
Before body mount, push the panel up to sit flush with the folded back edge of the panelled body.
Use Image for reference.
Fix the luggage panel to the wooden body in the areas circled with x10 m6x16mm hex head bolts (U010026).
Use MMC torque standard spec sheet for fixing fitment.
Use Image for reference.
Before body mount attach the luggage panel to the wooden body in the areas circled with x12 pozi head fixings (MGS04010).
Use Image for reference.
Once body mount process has been carried out, attach to chassis with x6 m6x16mm hex head bolts (U010026).
Use MMC torque standard spec sheet for fixing fitment.
Use Image for reference.