TIE ROD FITMENT

Document Number: SS14

Author: Thomas Sloan Kirton

Date Created:

Revision Number: v1.0.0

Document Approved by:

NOTE. Document is uncontrolled if printed 

All instructions in this manual must be adhered to for this stage. Read all instructions carefully and study the photographs. While learning this procedure, quality of work is more important than speed of assembly.

FIT TIEROD END AND SET AS PART OF REAR SUBFRAME FIT SEQUENCE.

USE 50MM SETTING PLATE TO SET TIE RODS CONSISTENTLY.

1mm TOLERANCE EITHER WAY OF THIS MEASUREMENT IS STANDARD TOLLERANCE FOR THIS STAGE OF FITMENT