HOOD RAIL SEAL FITMENT
Document Number: SS40
Author: Thomas Sloan Kirton
Date Created:
Revision Number: v1.0.0
Document Approved by:
NOTE. Document is uncontrolled if printed
All instructions in this manual must be adhered to for this stage. Read all instructions carefully and study the photographs. While learning this procedure, quality of work is more important than speed of assembly.
Tools Required:
- Seal Cutting Tool
- Tin Snips

- Use the seal cutting tool to cut x2 438mm lengths of R371012.
- Use tin snips to cut x2 357mm lengths of R371004.

- Apply 3M UV adhesion promoter 4298UV the hood area highlighted in blue.
- Stick the length of R371012 to the hood rail.
- Once cured, use the seal cutting tool and cut the area highlighted in red.
- Press fit the length of R371004 to the hood rail.
- Repeat process on the opposite side.
- Use image for reference.