SUPERSPORT WOODEN BODY REAR CORNER BRACKET FITMENT
Document Number: SS17
Author: Thomas Sloan Kirton
Date Created: 04/12/2025
Revision Number: v1.0.0
Document Approved by:

Once the wooden body rear end has been finished, keep the setting jig on and follow the next steps.
Use image for reference.

Slide the corner brackets into the areas circled.
Use image for reference.

Pilot hole the area for fixing and use x1 m4x20mm pozi head screw (MGS04010) to fix the rear section of the bracket to the rail.
Repeat process on the opposite side.
Use image for reference.

Fix the side of the bracket to the wheel arch with x2 m6x35mm coach bolt (U401008) & x2 m6 k-nut (MGN0024).
Repeat process on the opposite side.
Use image for reference.

Remove the wooden body from the buck and flip upside down.
Fix the top of the bracket to the rear rail using x3 m4x20mm pozi head screws (MGS04010).
Repeat process on the opposite side.
Use image for reference.